Qiui Cellmate 3 Chastity Cagink Pro Manual Guide

Qiui Cagink Pro English Manual Germany Manual and French Manual Cellmate 3

Cagink Pro introduction
Main Material : PC
Ring Material: Aluminum alloy
Surface: wear-resistant paint
Accessories: cage, instraction, charging cable,
Battery Capacity: 500ma
Charging Voltage: 5 V1A
Discharge Voltage<200V
Charging time: 4 hours
Working Power: <10w
Waterproof level: IPX6

STEP ONE:APP INSTRUCTIONS
PLEASE SCAN THE CODE TO DOWNLOAD THE APP (FOR ANDROID AND IOS SYSTEMS)

AFTER REGISTERING AND LOGGING IN, PRESS THE SWITCH BUTTON
Switch button (long press the switch button, Until the blue light is on, let go, At this time, the green light flashes, it means the boot is successful)

ADD A FRIEND PROCESS:
1. AFTER BOTH PARTIES REGISTER QIUI, OBTAIN BOTH PARTY QIUI ID ON THE PERSONAL PAGE.

2.ON THE MESSAGE PAGE-CONTACTS-UPPER RIGHT CORNER
SEARCH FOR THE ID OF THECONTACT TO BE ADDED

3. THE ADDED PARTY ACCEPTS FRIEND REQUESTS IN THE MESSAGE PAGE-CONTACTS- NEW FRIENDS

INVITATION BINDING PROCESS:
1. AFTER BINDING THE DEVICE TO THE LOCAL USER, CLICK THE
BLANK IMAGE ON THE DEVICE PAGE TO INVITE (NEED TO ADD FRIENDS).

2. THE INVITEE ACCEPTS THE MESSAGE ON THE MESSAGE PAGE
SMALL BELL IN THE UPPER RIGHT CORNER-DEVICE MESSAGE

MODES:
BLUETOOTH: BLUE LIGHT ON INDICATE MATCHED CELLULAR NETWORK:1.IT MIGHTTAKE MAXIMUM 5MINUTES TO CONNECT
FOR CONTROLLER UNDER ENERGY SAVING MODE 2. CELLULAR NETWORK ON: REAL TIME CONNECTION (PLEASE SUBSCRIBE FOR
CELLULAR NETWORK)

STEP TWO: WEARING
Add device to the APP by following the steps.

Open the ring to put penis and balls through the ring.

Unlock it in the APP,then adjust the device to a comfortable position.
Lock it in the APP or disconnect the APP to lock.(In case it is not locked, adjust the ring gently to make it lock.)

STEP THREE:TAKE THE CAGE OFF
1.Ensure your account has unlocking permissions. When blue light on indicate matched.

2.Tap unlock icon in the APP to unlock.

3.Press the switch button to unlock when the unlocking timer is done.

Shake the ring gently to open it till you can take it off.

BUILD-IN CELLULAR NETWORK
4G low frequency mode:

takes 1-5 MINS to connect, user can control the device with authorization.

4G Mode: user can CONTROL the device with authorization DIRECTLY

MONITOR CONTENT

1.Signal strength level.
2.4G icon display:
4Gon:4G is connected to the server
4G.:4G is trying to connect to the server
4Gx: The 4G server is not connected(Pressing the button will start connecting to the
server)
3. Device working mode
MO: Bluetooth mode, you need to connect the Bluetooth to switch the working mode.
M1:4G long frequency mode, more power consumption
M2:4G low frequency mode, more power saving,Wake up the device every 5 minutes
Note: In M1,2 mode, if 4G is off or disconnected, pressing the button will start to try
to connect to the 4G server
4. The number of electric shock countdowns that are currently in effect. 5. The first shock countdown to take effect shock.
6. After unlocking the countdown, you can press the device button to unlock. (After
unlocking, the device automatically locks after 30 seconds)
7. Battery power: The device needs to accept any command, re-synchronize the
power level.

MATTERS NEED TO BE ATTENTION
Recommend to clean the device more than once every 2 weeks.
Not for swimming/diving, fine for showering.
DO NOT immerse in water or other liquids.
Avoid contact of sharp items.
This product does not do medical purposes
It is recommended to wear no more than 14 days.
If a congestion, edema, obvious pain is difficult to endure, should
stop using it immediately
Don't place it in high temperature, open fire
To ensure health, please keep private use, do not exchange to wear
Clean after going toilet
It is normal to feel restraint during erection
Please avoid strong impact on the product
Do not expose the product to sunlight for a long time.
Seller is not responsible for causing physiological problems due to
the special definition of this product, please use this product with caution.